IEC 62133 Lithium Ion Battery Safety Test Apparatus IEC1642 IEC62619 IEC62660

• After-sales Service: Online Training, Reply Customer′s Question in 12h
• Warranty: 12 Months
• Type: Storage Battery Tester
• Model NO.: BAT
• Test Region: Battery Safety Tester
• Application: Lithium-ion Battery
• Customized: Customized
• Compliance: UL 9540A, IEC 62133, UL 1642, IEC 62619, IEC 62660
• Internal Volume of Pressure Vessel: 82 Liters
• Heating Temperature Range: Room Temp. to 300centigrade
• Heating Speed: 4-7 Centigrade/Min
• Pressure Range: 0-20 Bar
• Pressure Detection Accuracy: 0.05%
• Working Mode: Temperature Rise - Heat Preservation
• Pressure Withstand of Vessel: Normal Is 2MPa, It Can Be Customized
• Software: Window Based Software
• Software Language: English
• Material: Anti-Corrosion Steel
• Vacuum Pump Capacity: >2L/Min
• Equipment Type: Fire Testing Equipment
• MOQ: 1 Set
• OEM Service: Available
• Transport Package: It Is Packed in One Plywood Case
• Specification: 5L Volume or can be customized
• Trademark: Delta
• Origin: China Mainland
• HS Code: 9031809090
• Production Capacity: 100 Sets Battery Safety Test Apparatus / Month
• Package Size: 100.00cm * 100.00cm * 100.00cm
• Package Gross Weight: 100.000kg

Product Description

BAT IEC 62133 Lithium Ion Battery Safety Test Apparatus

Introduction:
The IEC 62133 Lithium Ion Battery Safety Test Apparatusprovides a safe container in which the tested cells can be thermally run away in a reproducible way while analyzing the conditions of thermal runaway and the changes in temperature and pressure during the thermal runaway process.

The IEC 62133 Lithium Ion Battery Safety Test Apparatus consists of an explosion-resistant pressure vessel, a thermal runaway trigger system, a temperature measurement system, and a pressure measurement system, which can trigger the thermal runaway of lithium-ion batteries by heating, short-circuiting, overcharging, and over-discharging in the vessel.

At the same time, it can measure the temperature of the surface of the battery thermal runaway cell, the opening temperature of the gas valve, the voltage change, and the pressure change inside the chamber, and display the test data and curve. The test device is designed with a gas collection port for sampling the gas generated by the thermal runaway of the battery cell and using gas chromatography for composition analysis.

The pressure vessel for battery abuse test is suitable for use in laboratories or research institutes to determine the thermal runaway conditions of lithium-ion batteries, battery safety tests, subsequent extended tests such as composition analysis, lower flammability limit (LFL), upper flammability limit (UFL), explosion pressure test, etc.


The IEC 62133 Lithium Ion Battery Safety Test Apparatus consists of:

• Pressure vessel, anti-corrosion steel made, with an internal volume of 82 liters.
• The pressure vessel can withstand a maximum of 3MPa (435 PSI) explosion pressure while configured with an explosion relief valve for safety.
• The explosion relief valve for automatic relief exceeds pressure when reaching 80% of the maximum limits.
• Equipped with a sampling port for gas sampling, with a ball valve to control the opening/close.
• With a sampling gas filtering device at the outlet, a filtering rate not less than 0.5 microns;
• Vessel door lock device, if the vessel has internal pressure, the door can not be opened to protect the operator.
• With observation window on the test vessel.
• Atmospheric gas replenishment device to replenish the chamber with specific atmospheric gas (normally N2).
• A thermal runaway trigger system can set thermal runaway conditions such as heating film, short circuit, overcharge, and discharge.
• The heating element can heat at a specific rate of up to 200°C, with an adjustable heating rate of 4 to 7°C per min.
• With a vacuum pump, the capacity is not less than 2 liters per minute.
• Up to 8 simultaneous temperature data acquisition circuits, with a resolution of 0.1°C.
• The temperature measurement system measures temperature changes within the chamber and can measure temperature changes at specific locations on the test vessel.
• Dual pressure transducers for low and high-range pressure measurement.
• A lower-pressure transducer, with a measuring range of -0.1 to 1.0MPa, has an accuracy of ± 0.5%.
• Equip with protection device to protect lower pressure transducer when the pressure is over range.
• A higher pressure transducer, with a measuring range of 0 to 3.0 MPa, has an accuracy of ± 0.5%.
• Data acquisition system: temperature: 8 channels, voltage: 2 channels, pressure: 2 channels, sampling frequency: 10 Hz, time, resolution of 1 sec.
• Window-based software, function includes:

1) Parameter setting, includes pressure transducer, heating rate, valve controls, etc;
2) Data record & display: temperature, pressure transducer, time, voltage;
3) Data curves display;
4) Auto mode & manual mode;
5) Test report export. 

Main Parameters:

No.	Item Name	BAT IEC 62133 Lithium Ion Battery Safety Test Apparatus
1	Heating temperature range	Room temp. To 300°C
2	Heating speed	4-7 °C/min
3	Heat release detection sensitivity	≥0.02 °C/min
4	Pressure range	0-20 bar
5	Pressure detection accuracy	0.05%
6	Working mode	Temperature rise - heat preservation
7	Volume	Can be customized
8	Pressure withstand of vessel	Normal is 2MPa, it can be customized
9	Thermocouple	8 - 16 pcs
10	Temperature withstand of thermocouple	Room temperature to 1100ºC

Advanced Options for the Pressure Vessel:

1. Varied internal volumes, such as 20, 340, and 500 liters.
2. Varied volume vessel in a system.
3. Nail penetration system to trigger battery abuse.
4. More temperature measuring thermocouples, 16, 32…channels.
5. Oxygen concentration analysis in the pressure vessel before battery abuse test.

Battery Fire Safety Testing Equipment Series:

1. Battery Abuse Test Pressure Vessel
2. Explosion Pressure Chamber
3. ASTM E918 Flammability Limit Tester
4. ISO 817 Burning Velocity Tester