Bcv Electric and Optical Fibre Cable Tester IEC60332-1

• After-sales Service: Response on Customers′ Questions Within 12 Hours.
• Warranty: 12 Months
• Description: Bcv Electric and Optical Fibre Cable Tester
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: BCV
• Reference Standards: IEC 60332-3-10, IEC 60332-3-21
• Function: Measure Resistance of Bunched Cable
• Application Field: Cable, Wire
• Features: China Hot Sale Bunched Cable Tester
• Dimension: 1120 mm (W) X 2200 mm (D) X 5070 mm (H)
• Dimension of Test Chamber: 1,000mm(W) * 2,000mm(D) * 4,000(H) mm
• Weight: 500kg
• Gas Supply: Air and Propane
• Power Supply: 110V AC 60Hz / 230V AC 50Hz
• Delivery Lead Time: 60 Days
• Trade Term: Fob, CIF, DDU, EXW
• Payment Term: 30% T/T as Deposit, The Balance Before Delivery
• Shipping Method: by Sea
• Language: English
• Transport Package: Packed in Veneer Case
• Specification: 1120 mm (W) x 2200 mm (D) x 5070 mm (H)
• Trademark: Delta
• Origin: China Mainland
• HS Code: 9031809090
• Production Capacity: 10 Sets / Month
• Package Size: 150.00cm * 200.00cm * 300.00cm
• Package Gross Weight: 200.000kg

Product Description

BCV Electric and Optical Fibre Cable Tester Under Fire Condition IEC60332-1
 

Product Description

BCV Electric and Optical Fibre Cable Tester Under Fire Condition IEC60332-1 is a series conforming to IEC 60332-3-10 (Category A~D) standards.

The test measures the expansion of vertical flame to the electronically or optically vertical cable or wire using the standard ignition source while supplying a certain amount of air to a chamber of a defined volume.

Additionally, if bunched cable vertical flame spread testers burner is adjusted by 20 degrees angle, it can be measure under IEEE 383(IEEE 1202) standard. Also, if Heat Release Facility is attached, it can measure fire dynamics value as H.R.R (Heat Release Rate), S.P.R (Smoke Production Rate) and so on.

 

Product Parameters

No.	Item Name	BCV Electric and Optical Fibre Cable Tester Under Fire Condition IEC60332-1
1	Dimension	1120 mm (W) x 2200 mm (D) x 5070 mm (H)
2	Weight	500kg
3	Power supply	110V AC 60Hz / 230V AC 50Hz, 5A
4	Ambient temperature	Operating 10oC to 35oC
5	Gas supply	Air and propane

Features

Test chamber has the dimension of 1,000±100(W) x 2,000±100(D) x 4,000±100(H) mm.

The bottom surface of the test chamber is higher than the ground while the rear side is supplemented with insulated material to insulate it from heat.

At the lower section of the test chamber, there is a 800±20(W)x 400±10(D) sized hole at the 150±10mm position from the front side of the chamber to supply the air.

There is a 300±30(W)x1,000±100(D) sized exhaust hole at the rear corner of the top section of the test chamber to allow emission of the smoke during the test.

A flame trap is installed at the front side of the burner of the vertical flame spread tester to prevent backfire by propane to ensure the utmost safety.

Unlike the conventional IEC60332-3 equipment, the vertical flame spread tester records all control and test conditions with the computer to add user friendliness.

If stop the excessive combustion test due to Water Spray device installed for extinguish.

The program on the requirement on standard and 70,000Btu/h can be program.

Wide stainless steel ladder dimensions: 500(W) ×3, 500(H) mm.

Standard stainless steel ladder dimensions: 800(W) ×3, 500(H).

Two sets of standard propane burner and venturi mixtures.

Follow the standard category can program for select a test.

Reference Standards

• IEC 60332-3-10:2000
• IEC 60332-3-21~25:2000

 

Our Advantages

1. High Quality Product: Most equipment have been on sale for more than 10 years, they are stable, reliable, with high quality and good reputation. All the products have been tested, run well and adjusted to good condition before delivery.

2. Good Faith Cooperation: Honesty is our foundation, we don't brag about the company and products, seek truth from facts, and don't make random promises.

3. Innovative Technology: Based on full experience in designing and manufacturing these equipment, and with users' feedback, we continuously improving our equipment and developing new products.

4. Awesome Service: Provide professional advice and reasonable offers within 2 hours at working time, and within 12 hours at non-working time. One year warranty for all the products, life time technical consulting, life time provision of spare parts, free software upgrades.

After Sales Service

1.    Warranty period for all products is One year;

2.    Within warranty period, all quality problems of the instrument shall be repaired by our company free of charge;

3.    Beyond warranty period, our company shall be responsible for life-time maintenance, only the cost of the accessories will be charged;

4.    User manual will be sent with the tester, some testers have demo for review.

5.    If users have question on operation, we supply on-line video training. Users can also come to our factory to get free training.

Please contact us for quotation and more technical information.