Ftir Fourier Transform Infrared Flue Gas Toxicity Testing Device

• After-sales Service: Online Training, Reply Customer′s Question in 12h
• Warranty: 12 Months
• Measuring Principle: Fourier Transform Infrared, Ftir
• Model NO.: FTIR
• Performance: Simultaneous Analysis of up to 50 Gas Components
• Brand: Gasmet
• Response Time: < 120 S
• Flow Rate: 0 - 4 L/Min
• Sample Gas: Non-Condensing, Particle-Free
• Sample Probe: PSP4000h
• Zero Point Calibration: Calibration with Nitrogen
• Filter Element: Ceramic, 2um
• Gas Cell Temperature: 50-180 Centigrade
• Features: High Quality Ftir Gas Toxicity Testing Device
• Type: Fire Testing Equipment
• Operation Mode: Automatic
• Display: Digital Display
• Language: English
• Transport Package: Ftir Is Packed in One Plywood Case
• Specification: FTIR Fourier Infrared Flue Gas Toxicity Tester
• Trademark: Delta
• Origin: China Mainland
• HS Code: 9031809090
• Production Capacity: 100 Sets / Month

Product Description

FTIR Fourier Infrared Flue Gas Toxicity Testing Device


Introduction:

• The Gasmet FTIR analyzer is an ideal tool for toxicity tests in fire testing applications. It can be used in conjunction with the Cone Calorimeter, and NBS Smoke Density Chamber for online measurements of combustion gases in fire tests.
• Typical application for CEM is H2O, CO2, CO, N2O, NO, NO2,SO2, HCl, HF, NH3, CH4, C2H6, C3H8, and C2H4. The Gasmet FTIR can be easily configured for a new set of compounds.
• Measured components and calibration ranges can be changed according to application. This technical data sheet describes one example of the system.
• The system is used for on-line measurements. It is an ideal tool to use for measuring trace concentrations of gas in combustion studies. All parts of the Gasmet CEMS are heated up to 180 ºC. It can be used for undiluted gases and the sample gases do not need drying beforehand.
• The Gasmet FTIR system consists of a Gasmet gas analyzer- it is configured to meet ISO 19702 standard, Gasmet PC, and Gasmet sampling system. All parts of the system are 19" rack-mounted cabinets.
• The Gasmet FTIR system includes all power connections and temperature controllers for heated lines and heated sample probes. The operation of the system is fully automatic and controlled by the Calcmet software.
• Gasmet PC and Calumet application software control the system. The measuring data can be transferred from the PC to the Control room with digital outputs (ModBus) or with analog outputs 4-20 mA.
• The Gasmet FTIR system provides different alarm functions such as Function alarm, Service alarm, and System alarm. Function and service alarms are associated with the Gasmet FTIR Gas Analyzer and with the Calumet analysis software. A system alarm comes from the Gasmet sampling system and it includes temperature alarms (from sample probe, heated lines, and sampling unit), flow alarms, and pressure alarms for zero gas. If any of the critical alarms are activated, instrument air starts to flow automatically into the system to prevent condensation.

Parameters:

No.	Item Name	FTIR Fourier Infrared Flue Gas Toxicity Tester
General Parameters
1	Measuring principle	FTIR (Fourier transform infrared)
2	Performance	Simultaneous analysis of up to 50 gas components
3	Operating temperature	20 ± 20 °C, non-condensing, dust-free ambient air
4	Storage temperature	-20 - +60 °C
5	Response time	T90: < 120 s, depending on the gas flow and measurement time
6	Gas cell temperature	50-180 °C
7	Sample gas	Non-condensing, particle-free
8	Flow rate	0~ 4 l/min
9	Sample gas pressure	Ambient
Measuring Parameters
10	Zero point calibration	24 hours, calibration with nitrogen(5.0 or higher N2 recommended)
11	Zero point drift	< 2 % of measuring range per zero point calibration interval
12	Sensitivity drift	None
13	Linearity deviation	< 2 % of measuring range
14	Temperature drifts	< 2 % of measuring range per 10K temperature change
15	Pressure influence	1% change of measuring value for 1% sample pressure change. Ambient pressure changes measured and compensated
System Alarm
	Gasmet FTIR gas analyzer and Calumet application software Gasmet FTIR gas analyzer and Calumet application software. Heated module temp. low/high Line 1 temperature low/high Line 2 temperature low/high. Line 3 temperature low/high Flow alarm low. Zero gas pressure is low.
Heated Lines
	Tube size	4/6 mm
	Core material	Teflon core
	Operating pressure	Maximum 400 kPa
	Temperature	Maximum 200 ºC
	Fittings	6 mm Swagelok
	Power supply	230 VAC or 115 VAC
	Power density	120 watts /meter
	The maximum length for the heated line is 30 m with 230 VAC and 15 m with 115 VAC power supply. All analysers are connected together with 1 m heated lines. Other lengths over 30 m (230 VAC) and temperatures are available on request.
Sample probe
	Sample probe	PSP4000H
	Power consumption	800 watts
	Operating temperature	180 ºC
	Filter element	Ceramic, 2 μm
	Dust loading	< 2 g/m3 Probe tube
	Material	SS 316
	Probe length	One (1) meter
	Sample temperature	600 ºC max
	Sample pressure	0.4 to 6 bar
	Mounting flange	DN65PN6
Electrical connections
	Main supply	3 x 16 A, 3 x L+N+PE
	Power consumption	7,5 kW (the full Gasmet CEMS including FTIR gas analyzer, PC, sampling unit, Gasmet O2 analyzer, sample probe, and heated lines 21 m)