XP-2 Smoke Density Test Chamber for Plastic Materials
Product Description
XP-2 Smoke Density Test Chamber for Plastic Materials is designed and manufactured in accordance with ASTM D2843 standard, it is mainly for building products testing.
By detecting the loss of light transmission in the test chamber, it can measure the smoke density of burning and decomposition of building material during the test.
Product Parameters
| No. |
Item Name |
XP-2 Smoke Density Test Chamber for Plastic Materials |
| 1 |
Dimension |
800 mm (W) x 500 mm (D) x 1000 mm (H) |
| 2 |
Weight |
35kg (computer is not included) |
| 3 |
Power supply |
220V, 10A, 50Hz |
| 4 |
Ambient temperature |
10 ~ 35 Centigrade |
| 5 |
Installation place |
Fume hood |
Features
- The test chamber is Teflon coating, to resist the corrosion of smoke released during burning.
- The light source is an incandescent lamp, and the photoelectric sensor is a silicon photodiode, which has a cosine calibration function.
- Color filter is equipped to filter out ultraviolet light and infrared light.
- Gas pressure of main burner is 256KPA, it is subjected to flame impact on test specimen.
- The gas pressure of the auxiliary burner is 138KPA, which can continue to burn the molten droplets.
- The computer and test software are equipped.
Functions of test software:
- XP-2 Computer Control Plastic Burning Smoke Density Test Chamber can display the transmittance value of each 15s optical path and can also draw the transmittance test curve. After test, the software can display the SDR smoke density value, that is, the smoke integral value;
- The test software can synthesize test reports of three sets of test samples to draw an SDR smoke density development curve.
- You can use the software to compare the three test results to judge whether the test results are ok.
- Connecting with a printer, the test results can be printed.
Audited Supplier 
){kind=link}