ISO817 Refrigerant R152A Burning Velocity Test Equipment

• After-sales Service: Response on Customers′ Questions Within 12 Hours.
• Warranty: 12 Months
• Type: Storage Battery Tester
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: BVT
• Test Region: Battery Safety Tester
• Application: Lithium-ion Battery
• Customized: Customized
• Compliance: ISO 817 Annex C
• Flame Tube: 40mm Inner Diameter, 1200mm Length
• Tube Material: Pressure Resistant Glass
• Gas Pressure Sensor: Accuracy 0.05%
• Ignition Method: Electrostatic Ignition, 15kv, 0.5s
• Features: ISO817 Refrigerant Burning Velocity Test Equipment
• Gas Distribution Method: Partial Pressure Method
• Stirring Speed: 20-800 R/Min
• Dimension: 1325mm * 1882mm * 625mm
• Weight: 120kg
• Power Supply: 220V, 50Hz, 200W
• Gas Supply: Compressed Gas
• Language: English
• MOQ: 1 Set
• OEM Service: Available
• Transport Package: It Is Packed in One Plywood Case
• Specification: ISO 817 Annex C
• Trademark: Delta
• Origin: China Mainland
• HS Code: 9031809090
• Production Capacity: 100sets Burning Velocity Test Equipment / Month
• Package Size: 150.00cm * 200.00cm * 80.00cm
• Package Gross Weight: 180.000kg

Product Description

ISO817 Refrigerant R152A Burning Velocity Test Equipment

Introduction:
The Gas Burning Velocity Test Apparatus, by ISO 817 Annex C, is used to measure the burning velocity of flammable gas with air mixed, such as refrigerants, and li-ion battery thermal runaway venting gas, by testing on synthetically replicated gas.

The flammable gas is pre-mixed with air in a tank, and the homogeneous flammable gas-air mixture is introduced to the 1,200mm glass tube with an internal diameter of 40mm and is ignited with the electrodes mounted at the bottom position of the glass tube. The flame will propagate from the lower to the upper end with a constant propagation speed at the flame front. The flame propagation inside the tube is recorded using a high-speed camera and the images are then transmitted to the computer for measuring the flame propagation speed and calculating the flame front area. The flammable gas's Burning Velocity (Su) is obtained by dividing the consumed mixture volume by the frame surface area.


The Gas Burning Velocity Test Apparatus consists of:

• High-temperature resistance burning tube, diameter of 40mm, length of 1200mm, pressure resistance better than 0.1MPa.
• 10L Pre-mix chamber, with a pressure resistance of not less than 1 MPa.
• Pressure measurement system, measuring range of -0.1 to 0.3MPa, accuracy better than 0.05% F.S.
• Equips with a pressure relief port device and a special solenoid valve for gas distribution, with a solenoid valve with a pressure resistance of not less than 1.6Mpa and a response speed of not less than 10ms.
• K-type insulated thermocouples, diameter of 1.6mm.
• Ignition system, equipped with 2 ignition needles and an ignition transformer.
• Vacuum pump, capacity no less than 1L/s, used for venting air from the chamber.
• Operation software, function includes gas mixture, gas fill, ignition, and camera activation.
• Automatic program for gas-air mixture preparation in specific concentrations.
• Flame area calculation software, auto calculates the cross-section area of the flame base (af) and flame surface area (Af).
• High-speed camera, auto-triggered by the software.
• Compact physical size, low weight, and high light sensitivity allow use in limited space.
• The system captures at a speed of not less than 1,000 fps at full frame resolution conditions.
• The system captures at a speed of not less than 70,000 fps at 1280 x 8-pixel resolution conditions.
• Minimum exposure time up to 1.0μs.
• The system has a pixel size of 14.6μm and a dynamic range of 60 dB.

Main Parameters:

No.	Item Name	ISO817 Refrigerant R152A Burning Velocity Test Equipment
1	Flame tube	40mm inner diameter, 1200mm length
2	Tube material	Pressure resistant glass
3	Gas pressure sensor	Accuracy 0.05%
4	Ignition method	Electrostatic ignition, 15kV, 0.5s
5	Gas distribution method	Partial pressure method
6	Stirring speed	20-800 r/min
7	Dimension	1325mm * 1882mm * 625mm
8	Weight	120kg
9	Power supply	220V, 50Hz, 200W
10	Gas supply	Compressed gas (no oil and no water)

Battery Fire Safety Testing Equipment Series:

1. Battery Abuse Test Pressure Vessel
2. Explosion Pressure Chamber
3. ASTM E918 Flammability Limit Tester
4. ISO 817 Burning Velocity Tester